プリントサーバー Brother HL-1870NのPDF 交換手順をオンラインで閲覧またはダウンロードできます。Brother HL-1870N 4 ページ。 Brother imprimante laser - guide de configuration rapide (french)
Brother HL-1870N にも：パンフレット＆スペック (6 ページ), クイック・セットアップ・マニュアル (2 ページ), ドライバーインストールマニュアル (2 ページ), ドライバーインストールマニュアル (2 ページ), パーツリスト (27 ページ), (フランス語) 迅速設置ガイド (2 ページ)

How to Replace the PF Kit (1850/1870N)

Part 1 - Replacing the Paper Pick-up Roller

•

To prevent electric shock, always turn the printer off and disconnect the power cord

from the AC outlet/socket before cleaning the printer or performing maintenance.

•

Before you replace the feed roller, turn the power switch off, unplug the AC power cord

and allow the printer to cool for at least 30 minutes before replacing the feed roller.

Step 1

1. Turn off the printer by the power switch

located on the bottom of the right side

of the printer.

2. Unplug the power cord from the rear of

the printer.

3. Allow printer to cool 30 minutes.

4. Remove the drum, toner, paper tray and

set these aside.

To remove the drum, press the Cover

Release Button and then open the front

cover. See Figure 1.

Figure 2.

Figure 3.

Figure 4.

Step 2

1. Remove the Drum Unit Assembly and

close the front cover. See Figure 2.

Step 3

1. Place the printer gently on its back.

Locate the paper pick-up roller

shown by the arrow in Figure 3.

Step 4

1. On the right hand side of the paper

pick-up roller, as shown by the

arrow in Figure 4, locate the white

tab on the locking piece.

Figure 1.