- ページ 6

スキャナー Fujitsu ScanSnap N1800のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanSnap N1800 23 ページ。 Google docs add-in user's guide network scanner
Fujitsu ScanSnap N1800 にも：パンフレット＆スペック (4 ページ), ソフトウェアマニュアル (22 ページ), ソフトウェアマニュアル (20 ページ)

ページを印刷する

When carrying the scanner outside while it is

raining or snowing, pay special attention so the

scanner does not get wet.

When you perform cleaning, make sure that the

inside of the scanner is free of any foreign

objects, and be careful not to get your hand or

the cloth caught on the pick spring (metal part) as

a deformed pick spring (metal part) may cause

injury.

■ Precautions

READ ALL OF THIS DOCUMENT AND THE

OPERATOR'S GUIDE CAREFULLY BEFORE USING

THIS SCANNER. IF THIS SCANNER IS NOT USED

CORRECTLY, UNEXPECTED INJURY MAY BE

CAUSED TO USERS OR BYSTANDERS.

Also, keep this document in a safe place so that it can be

easily referred to during use of this scanner.

While all efforts have been made to ensure the accuracy

of all information in this document, PFU assumes no

liability to any party for any damage caused by errors or

omissions or by statements of any kind in this document,

its updates or supplements, whether such errors are

omissions or statements resulting from negligence,

accidents, or any other cause.

PFU further assumes no liability arising from the

application or use of any scanner or system described

herein; nor any liability for incidental or consequential

damages arising from the use of this document. PFU

disclaims all warranties regarding the information

contained herein, whether expressed, implied, or

statutory.

Use of Mercury

Lamp(s) inside the scanner contain mercury

and must be recycled or disposed of

according to local, state, or federal laws.

To avoid unexpected injuries:

Do not put the substance contained in the lamp in your

mouth as it has mercury.

Do not breathe the chemical liquid contained in the

scanner lamps.

Do not incinerate, crush, or shred the lamps or

scanner parts.

LCD Peculiarities

The LCD backlight is a fluorescent tube that contains

some mercury.

Be aware that neither of the following is considered a

fault.

- Despite the advanced technologies used to produce

the devices TFT color LCD's, the large number of

pixels involved means that an occasional (always-

on) bright dot or (always-off) dark dot may be visible.

- The characteristics of the LCD mean that there may

be some variation in hue and intensity of colors

across the screen.

Replacing Batteries

In order to retain data such as BIOS information, this

product has a battery (CMOS RAM battery) on board.

ARNI N G

Warning Label

The scanner carries the warning label.

Do not remove the warning label from the scanner. Avoid

staining the label, so that it is clearly visible.

■ Disclaimer of Liability

Reproducibility of the Scanned Image

Data

Confirm that the image data scanned with this product

meets your requirements (for example, image

reproducibility in size accuracy, fidelity, content, colors).

Make sure that there are no missing parts in the scanned

image data before disposing of the original document

used for scanning.

Note that when there are sections marked with a

highlight pen, the color of the marked section may not

be accurately reproduced depending on the color and

density, or may result in a different color tone from the

original.

■ Regulatory Information

FCC Declaration

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction document, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Do not replace the battery yourself,

as there is a risk of explosion if the

wrong type is used. Please contact

your maintenance engineer in

charge when the battery runs low.

Do not touch the battery. Never

install or remove the battery by

yourself. Doing so may cause

electric shock or static electricity

which can damage the device.