- ページ 25

スキャナー Fujitsu ScanSnap S300のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanSnap S300 37 ページ。 Color image scanner
Fujitsu ScanSnap S300 にも：インストール手順 (3 ページ), 仕様 (2 ページ), 洗浄方法 (2 ページ)

ページを印刷する

Adjust the side guides to the width of the loaded document.

ATTENTION

Press the [SCAN] button.

Scanning is started.

⇒

The ScanSnap Quick Menu appears after scanning.

⇒

Select a desirable action in the ScanSnap Quick Menu for the image of the

scanned document.

The scanning method above is for the case where the [Quick Menu Mode] is

applied.

HINT

If you switch to the [Left-click Menu Mode], you will be able to perform the

scanning operation with the specified application without the Quick Menu

displayed. You can also switch to any settings for scanning if you register

scanning configurations to the Left-click Menu in advance. When you

become accustomed to the ScanSnap operation, switch the Operation

Mode during operation when needed.

The Operation Mode can be switched by right-clicking the ScanSnap icon

The ScanSnap scanner can scan documents using various settings.

Refer to the "ScanSnap S300 Operator's Guide" on the ScanSnap Setup

CD-ROM to learn more.

Set the paper with its face up and its bottom margin towards the

scanning direction when you configure the settings as follows:

In the [ScanSnap Manager - Scan and Save Setting] dialog box,

select the [Scanning] tab

face up].

on the task bar and then marking [Use Quick Menu].

[Option]

[Set the document with its

ScanSnap S300 Getting Started　