ページを印刷する
or remove the items. Close the door
and touch the Start/Pause
button. The programme or the delay
start continues.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Start/Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press button On/Off
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the
water of the last rinse, the programme is
completed, but:
• The time area shows
display shows the door locked
• The drum still turns at regular intervals
to prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the
1. If necessary, touch the Spin
2. Press theStart/Pause
The option indicator Rinse Hold
disappears.
3. When the programme is completed
to deactivate
4. Press the On/Off
12.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:
• You do not use the appliance for 5
• 5 minutes after the end of the
If the dial is rotated to the "Reset"
position
turns off in 30 seconds.
and the
.
door:
button to decrease the spin speed
proposed by the appliance.
• If you have set Rinse Hold
appliance drains the water and
spins.
• If you have set Night
appliance only drains the water
and the door locked indicator
goes off, you can open the door.
seconds to deactivate the appliance.
minutes .
Press the button On/Off to activate
the appliance again.
washing programme
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new
cycle.
, the appliance automatically
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
ENGLISH
23
button:
the
the
button for a few