- ページ 6

ストレージ Fujitsu ETERNUS DX DiskのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX Disk 44 ページ。 Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk にも：ユーザーマニュアル (35 ページ), ユーザーマニュアル (42 ページ), 設定マニュアル (28 ページ), 設定マニュアル (28 ページ), 設定マニュアル (29 ページ), 設定マニュアル (25 ページ), 設定マニュアル (32 ページ), 設定マニュアル (35 ページ), 設定マニュアル (31 ページ), 設定マニュアル (43 ページ), 設定マニュアル (21 ページ), 設定マニュアル (24 ページ)

Chapter 1

Workflow

This chapter describes the procedure for connecting ETERNUS DX storage systems to a server running Solaris

OS.

Procedures may vary according to the Fibre Channel card driver type and connection method.

When a Fibre Channel switch is used to make the connection, refer to the "FUJITSU Storage ETERNUS DX

Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings" and use the proce-

dure described.

1.1

The following documents may be relevant when using a Fujitsu driver.

Exactly which documents are required depends on the connection environment, see the "Workflow" section

that follows for details.

Required Documents

"Server Support Matrix"

•

"Server Support Matrix for FC-SWITCH"

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Disk Storage System Settings" that

•

corresponds to the ETERNUS DX to be connected

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel

•

Switch Settings"

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

•

Driver Settings for Fujitsu Fibre Channel Cards"

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

•

Multipath Driver Settings"

"ETERNUS Web GUI User's Guide"

•

"ETERNUSmgr Install Guide"

•

"ETERNUSmgr User Guide"

Manuals supplied with the Fibre Channel card, multipath driver, and VxVM

•

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3702-16ENZ0