- ページ 12
ストレージ Fujitsu ETERNUS DX100 S3のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX100 S3 15 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3 にも： 設定マニュアル サーバー接続 (12 ページ), 設定マニュアル サーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), 安全上のご注意 (12 ページ)
ページを印刷する
Host Affinity Settings
8
The host affinity settings ensure security when multiple servers are connected by assigning the host interface ports
that the hosts (servers) can access and the volumes that the hosts (servers) can recognize.
Follow the procedure below to set host affinity by associating a host group, a CA port group and a LUN group.
1.
Host group addition
Add the information on the hosts (servers) that access
the ETERNUS DX.
To display the screen to add the host groups (example
for iSCSI host groups):
Click the [Connectivity] tab, click [Host Group] in
[Category], and then click [Add iSCSI Host Group] in
[Action].
2.
Port parameter settings
Set the connection information between the host
interface port and the server.
To display the screen to set the port parameters
(example for iSCSI Port):
Click the [Connectivity] tab, and then click [iSCSI]
under [Port Group] in [Category].
for the iSCSI port to set the port parameters for on the
[iSCSI Port] screen and then click [Configure iSCSI Port]
in [Action].
3.
Port group creation
Create a port group for a host to access the ETERNUS
DX.
To display the screen to create a port group (example
for iSCSI Port):
Click the [Connectivity] tab, click [Port Group] in
[Category], and then click [Create iSCSI Port Group] in
[Action].
4.
LUN group addition
Add a group of volumes that can be recognized by the
host (LUN group).
To display the screen to add a LUN group:
Click the [Connectivity] tab, click [LUN Group] in
[Category], and then click [Add LUN Group] in [Action].
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
Select the checkbox
12
Copyright 2017 FUJITSU LIMITED
P3AM-7852-06ENZ0