- ページ 3
ストレージ Fujitsu ETERNUS DX200 S3のPDF 設定マニュアル サーバー接続をオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX200 S3 12 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX200 S3 にも： 設定マニュアル サーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), 設定マニュアル (18 ページ), セットアップマニュアル (15 ページ), 安全上のご注意 (12 ページ)
ページを印刷する
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Solaris OS, Windows
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, server, OS, Converged Network Adapter cards, and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names.
This manual references the following documents:
•
Fabric OS Administrator's Guide Supporting Fabric OS
ETERNUS Web GUI User's Guide
•
This manual is designed for use with the following ETERNUS DX storage systems:
ETERNUS DX100 S3/DX200 S3 Disk storage system
•
•
ETERNUS DX500 S3/DX600 S3 Disk storage system
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up an ETERNUS DX.
"Chapter 2 Setting Up the ETERNUS DX" (page 8)
•
This chapter describes how to set up an ETERNUS DX.
3
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
®
, Linux, or VMware ESX via an FCoE interface.
Preface
5th Edition
December 2014
P3AM-7982-05ENZ0