- ページ 22

ストレージ Fujitsu Eternus DX440 S2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Eternus DX440 S2 42 ページ。 Disk storage system settings
Fujitsu Eternus DX440 S2 にも: ユーザーマニュアル (35 ページ), セットアップ (20 ページ), 設定マニュアル (28 ページ), 設定マニュアル (15 ページ)

Fujitsu Eternus DX440 S2 ユーザーマニュアル
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
6.1.3

Creating the Virtual Switches

Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.
Perform the following procedure to each vmnic that configures iSCSI SAN.
1
Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-
work] in the upper right of the window.
2
Select [VMkernel] and click the [Next] button.
3
Select the checkbox of the target network adapter and click the [Next] button.
4
Set properties of port groups as required, and click the [Next] button.
5
Set the IP address and subnet mask of "VMkernel", and click the [Next] button.
6
Repeat
Step 1
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
through
Step 5
to add another virtual switch (vSwitch2).
22
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0