- ページ 9

ストレージ Fujitsu Eternus DX500 S3のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Eternus DX500 S3 13 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX500 S3 にも：設定マニュアルサーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (18 ページ), 安全上のご注意 (12 ページ)

ページを印刷する

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

Parameter

Transfer Rate

Frame Size

Reset Scope

Release Reservation if Chip is Reset

*1: Set the appropriate value from the following table.

Table 2.4 Transfer Rate setting values (for Fabric connection)

Fibre Channel switch maximum

speed

16Gbit/s

8Gbit/s

4Gbit/s

*1: Specify "Auto Negotiation" for direct connections to 16Gbit/s Brocade Fibre Channel cards.

Make sure to prepare and set up Fibre Channel switches for Fibre Channel connections. For setting details,

refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Chan-

nel Switch Settings" or "Fabric OS Administrator's Guide Supporting Fabric OS".

2.1.2

Creating the Server Accessible LUN Groups (Setting the LUN Groups)

Create LUN groups for the server to access. Refer to "Connectivity Management" in "ETERNUS Web GUI User's

Guide" for details, and set the LUN groups.

Depending on the OS version, the server may not recognize the ETERNUS DX unless a LUN group is as-

signed from LUN0. In this case, assign a LUN group starting from LUN0 in ascending order.

Transfer rate setting value

16Gbit/s CA

16Gbit/s (*1)

8Gbit/s

4Gbit/s

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

Setting value

See the table below (*1)

2048

I_T_L

Disable

8Gbit/s CA

8Gbit/s

4Gbit/s

P3AM-7962-08ENZ0