- ページ 8

ストレージ Fujitsu Eternus DX500 S3のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Eternus DX500 S3 18 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX500 S3 にも：設定マニュアルサーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), 安全上のご注意 (12 ページ)

ページを印刷する

FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series

2.1.

Example of a Non-Stop Storage Configuration

2.1.1.

Overview of System Configuration

The system uses VMware vSphere 6 for virtualization.

Storage Cluster is used to provide duplicate storage systems and vSphere HA is used to provide duplicate ESXi servers for the business servers.

Storage Cluster supports FC and iSCSI for connections between servers and storage systems, and connections between storage systems.

This configuration uses an FC.

Two Fibre Channel switches are also provided for redundancy.

A management server is used to manage the virtual environment and storage systems and to collect performance data.

Business

server

ESXi servers (for business servers) (vSphere HA)

Flexible Tier Volume (FTV)

Business drives

(using Storage Cluster for clustering)

Note that the servers listed below and network equipment such as the L2SW are not explained in this document.

NTP Server

The ESXi servers, vCenter Server, ESF Server, MA Server, MA Probe, Fibre Channel switches, and ETERNUS AF/DX use the NTP service to

synchronize their clocks.

DNS Server and AD Server

Required by vCenter Server, the ESXi servers, and management servers to check FQDNs with each other.

Business

server

....

Fibre Channel

switches

Figure-1 System overview

vCenter

ESF

Server

ESXi server (for the management server)

Application

Business servers

Management

server

Fibre Channel

switches

Storage systems

Page 8 of 18

Server

Probe

Hardware

FUJITSU Server

PRIMERGY RX2540 M1

FUJITSU Server

PRIMERGY RX2540 M1

Brocade 6505 switch

FUJITSU Storage

ETERNUS DX200 S4

SAN multipath

LAN, used for operation

and monitoring

http://www.fujitsu.com/eternus/

Quantity