- ページ 7
ストレージ Fujitsu ETERNUS DX8000 seriesのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX8000 series 17 ページ。
ページを印刷する
Chapter 1 Workflow
Refer
Refer
Refer
Refer
After completing all the required procedures in this manual, follow the procedures in "FUJITSU
Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI)" for each OS.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Setting the Affinity Groups
Set the server accessible LUN groups.
-
"2.1.4 Setting the Server Accessible LUN Groups (Setting Affinity Groups)" (page 12)
Setting Host Affinity Groups
Define the relationship between the iSCSI card HBA and LUN group.
-
"2.1.5 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 13)
When setting CHAP authentication
Setting CHAP Authentication
Set CHAP authentication to enhance security for
an iSCSI connection.
-
"2.1.6 Setting CHAP Authentication" (page
13)
Setting the CA Reset Groups
Assign the iSCSI ports of the ETERNUS DX to the same reset group, depending on the connection
conditions.
-
"2.2.1 Setting the CA Reset Groups" (page 14)
Copyright 2014 FUJITSU LIMITED
When not setting CHAP authentication
7
P3AM-3972-08ENZ0