- ページ 31

プリントサーバー Brother MFC MFC-465CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC MFC-465CN 39 ページ。 Brother multifunction printer quick setup guide
Brother MFC MFC-465CN にも：クイック・セットアップ・マニュアル (38 ページ)

ページを印刷する

Installing the Driver & Software

For Network Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine on pages 4 through 14.

Note

• For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

• Make sure there are no memory cards or a USB

Flash memory drive inserted into the media drives

or USB direct interface at the front of the machine.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Insert the network cable into the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully route the network cable through the

trench and out the back of the machine.Then,

connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

Lift the scanner cover to release the lock

Gently push the scanner cover support

down

and close the scanner cover

Turn on the machine by connecting the power

cord.

Turn on your Macintosh

Macintosh