Setup Procedures
Preparation
S T E P
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
Documentation CD
●
Related manuals, such as manuals for the server or the networking equipment that is used
●
Installation Space
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX Disk storage
system is to be installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS DX Disk storage system meets the environmental conditions and
installation environment conditions.
-Site Planning- "2.1 Installation Specifications"
●
-Site Planning- "2.4 Installation Environment"
●
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS DX Disk storage
system.
-Site Planning- "2.5 Outlet/Socket Specifications"
Network Environment
-Installation- "1.1 Connection Preparation"
●
-Installation- "1.2 Setup Preparation"
●
ETERNUS Web GUI User's Guide
●
Completing and attaching the Network Settings label
Write down the following information on the Network Settings label and attach it to the controller enclosure.
IP address and subnet mask for the ETERNUS DX Disk storage system
●
IP address for maintenance work
●
Settings for the PC
Setup Network Environment
●
ƪ
IP address : 192.168.1.2
ƪ
Subnet mask : 255.255.255.0
Set the Web browser
●
Refer to "ETERNUS Web GUI User's Guide" for details on the settings that are required.
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
7
P3AM-4872-11EN
ページを印刷する