- ページ 12
ストレージ Fujitsu ETERNUS2000 model 100のPDF サーバー接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS2000 model 100 32 ページ。 Disk storage system
Fujitsu ETERNUS2000 model 100 にも： マニュアル (28 ページ), サーバー接続マニュアル (25 ページ), 接続マニュアル (19 ページ), 接続マニュアル (31 ページ)
ページを印刷する
Chapter 3
Note the following issues when connecting the ETERNUS Disk storage system to a server.
3.1
Connection Notes for Windows Server® 2008 R2 and
Windows Server® 2008
Before the ETERNUS Disk storage system is connected to a server running Windows Server®
2008 R2 or Windows Server® 2008, the ETERNUS Disk storage system firmware should be
upgraded to a version that is Windows Server® 2008 R2 or Windows Server® 2008 compatible.
Refer to the "Server Support Matrix" for a list of usable ETERNUS Disk storage system firmware
versions.
3.2
Connection Notes for PRIMERGY/PRIMEQUEST
1000 Series
3.2.1
Connection Notes
•
The following operation conditions are recommended to maintain storage system reliability:
•
The following cluster configuration is supported for Windows®:
For details on servers which support cluster configuration, consult your FUJITSU sales represen-
tative.
3.2.2
When Installing Multiple Fibre Channel Cards
•
Only the same type of Fibre Channel cards can be installed together. Different types of Fibre
Channel cards cannot be mixed.
P3AM-2922-05ENZ0
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Notes
-
Multiple paths
-
Use of drivers for ETERNUS Disk storage systems which support path redundancy control
Configure a multipath environment, and select a driver for ETERNUS Disk storage
systems which supports path redundancy control to increase redundancy and reliability of
the connection between the ETERNUS Disk storage systems and the server.
-
MSCS (Microsoft Cluster Service) configuration
-
WSFC (Windows Server Failover Cluster) configuration
12
Copyright 2010 FUJITSU LIMITED