- ページ 26
ストレージ Fujitsu ETERNUS2000 model 100のPDF 接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS2000 model 100 31 ページ。 Disk storage system
Fujitsu ETERNUS2000 model 100 にも： マニュアル (28 ページ), サーバー接続マニュアル (25 ページ), サーバー接続マニュアル (32 ページ), 接続マニュアル (19 ページ)
ページを印刷する
Chapter 10 Setting Up and Checking the device-mapper multipath
>
10.2 For SLES
3
10.2.2
Enabling the device-mapper multipath
Execute the following command to enable the device-mapper multipaths.
# insserv boot.multipath multipathd
# chkconfig multipathd on
# chkconfig boot.multipath on
# /etc/init.d/boot.multipath start
# /etc/init.d/multipathd start
P3AM-4212-02ENZ0
ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
Add the following lines at the end of the "devices" section
•
For SLES11
devices{
device{
vendor
product
prio
path_grouping_policy
path_selector
failback
no_path_retry
}
}
•
For SLES10
devices{
device{
vendor
product
prio_callout
path_grouping_policy
path_selector
failback
no_path_retry
}
}
The blacklist section is used to specify any internal disks or other devices that are to be
excluded from the multipath configuration. If required, refer to the Novell web-site for
details.
"FUJITSU"
"E2000"
alua
group_by_prio
"round-robin 0"
immediate
10
"FUJITSU"
"E2000"
"/sbin/mpath_prio_alua %d"
multibus
"round-robin 0"
immediate
10
26
End of procedure
Copyright 2010 FUJITSU LIMITED