- ページ 11

プリントサーバー Brother MFC-8910DWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8910DW 36 ページ。 Quick setup guide - english
Brother MFC-8910DW にも：マニュアル (30 ページ), ネットワーク・マニュアル (29 ページ), マニュアル (27 ページ), クイック・セットアップ・マニュアル (45 ページ), ユーザーマニュアル (23 ページ), クイック・セットアップ・マニュアル (45 ページ), 製品安全マニュアル (23 ページ)

Digital Certificate for SSL communication

Creating a Certificate Signing Request (CSR)

A Certificate Signing Request (CSR) is a request sent to a CA in order to authenticate the credentials

contained within the certificate.

Note

We recommend that the Root Certificate from the CA be installed on your computer before creating the

CSR.

Click Create CSR.

Enter a Common Name and your information, such as Organization.

Your company details are required so that a CA can confirm your identity and attest to the outside world.

Note

• The length of the Common Name must be less than 64 characters. Enter an identifier such as an IP

address, node name or domain name to use when accessing this machine through SSL/TLS

communication. The node name is displayed by default. The Common Name is required.

• A warning will pop-up if you enter a different name in the URL than the Common Name that was used for

the certificate.

• The length of the Organization, the Organization Unit, the City/Locality and the State/Province must

be less than 64 characters.

• The Country/Region should be an ISO 3166 country code composed of two characters.

• If you are configuring the X.509v3 certificate extension, choose the Configure extended partition check

box and then choose Auto (Register IPv4) or Manual.

You can choose the Public Key Algorithm and Digest Algorithm settings from the pull-down list. The

default settings are RSA(2048bit) for Public Key Algorithm and SHA256 for Digest Algorithm.