ページを印刷する
simultaneously until the
comes on/goes off above the
indicator.
8.4 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Connect the mains plug to the mains
socket.
10. DAILY USE
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press button On/Off to activate the
appliance.
A short tune sounds.
10.2 Loading the laundry
1. Open the appliance lid.
• To activate/deactivate this option
indicator
2. Open the water tap.
3. Put 2 litre of water in the detergent
This activates the drain system.
4. Put a small quantity of detergent in
5. Set and start a programme for cotton
This removes all possible dirt from the
drum and the tub.
2. Push the button A.
The drum opens automatically.
3. Put the laundry in the drum, one item
4. Shake the items before you put them
Make sure not to put too much laundry
in the drum.
5. Close the drum and the lid.
touch the
button and the
The corresponding indicator next the
touch button illuminates.
compartment for washing phase.
the compartment for washing phase.
at the highest temperature without
laundry.
at a time.
in the appliance.
ENGLISH
17
.
A