- ページ 26
洗濯機 AEG ProSense 6000 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG ProSense 6000 Series 40 ページ。
ページを印刷する14.2 Removing foreign objects
Make sure that pockets are empty and all
loose elements are tied up before
running your cycle. Refer to "The laundry
load" in "Hints and tips".
Remove any foreign objects (such as metal
clip, buttons, coins, etc) that you may find in
the door seal, the filters and the drum. Refer
to "Door seal with double lip trap", "Cleaning
the drum", "Cleaning the drain pump" and
"Cleaning the inlet hose and the valve filter"
paragraphs. If necessary, please contact the
Authorised Service Centre.
14.3 External cleaning
Clean the appliance with mild soap and warm
water only. Fully dry all the surfaces. Do not
use a scouring pads or any scratching
material.
CAUTION!
Do not use alcohol, solvents or chemical
products.
CAUTION!
Do not clean the metal surfaces with
chlorine-based detergent.
14.4 Descaling
If the water hardness in your area is high
or moderate, we recommend that you
use a water descaling product for
washing machines.
Regularly examine the drum to check any
limescale.
The regular detergents already contain water
softening agents, but we recommend to run a
cycle with empty drum and a descaling
product occasionally.
Always follow the instructions that you
find on the packaging of the product.
26
ENGLISH
14.5 Maintenance wash
With the low temperature programmes it is
possible that some detergent stays in the
drum. Perform a maintenance wash regularly.
To do this:
• Remove all laundry from the drum.
• Select the cotton programme with the
highest temperature or use if is available
programme Machine clean. Add a small
quantity of powder detergent into empty
drum, in order to rinse out any left
residues.
14.6 Door seal
This appliance is designed with a self
cleaning draining system, allowing light fluff
fibers that fall off the clothes to be drained out
with the water. Regularly examine the seal.
Coins, buttons, other small items can be
recovered at the end of the cycle.
Clean it when needed, using ammonia cream
cleanser agent without scratching the seal
surface.
Always obey the instructions that you find
on the packaging of the product.
14.7 Cleaning the drum
Regularly examine the drum to prevent rust
particles.
For a complete cleaning:
1. Clean the drum with special products for
stainless steel.
Always follow the instructions that you
find on the packaging of the product.