- ページ 8
洗濯機 AEG ProSense 6000 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG ProSense 6000 Series 40 ページ。
ページを印刷するWater supply pressure
1)
Water supply
Maximum Load
Spin Speed
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
1. Open the door. Remove all the items from
the drum.
Accessories delivered with the
appliance may vary depending on the
model.
2. Put the packaging element on the floor
behind the appliance and carefully put it
down onto its rear side. Remove the
polystyrene protection from the bottom.
8
ENGLISH
Minimum
Maximum
Cotton
Maximum spin speed
1
2
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Cold water
9 kg
1351 rpm
CAUTION!
Do not lay washing machine on its front.
3. Put the appliance back into an upright
position. Remove the power supply cable
and the drain hose from the hose holders.
WARNING!
It is possible to see water flowing
from the drain hose. This is because
the washing machine has been
tested at the factory.
4. Remove the three bolts by using the key
supplied with the appliance. Pull out the
plastic spacers.