プリントサーバー Brother NC-8100hのPDF クイック・ネットワーク・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother NC-8100h 6 ページ。 Print/fax server
ページを印刷する
Quick Network Setup Guide
Caution: DO NOT touch the surface of the main boards within 15 minutes after turning off the power.
For more details about how to optimize the Network board, please refer to the Network User's Guide on the CD-
ROM supplied with the MFC.
Two Screws
Before Starting Installation:
Be careful when handling the NC-8100h. There are many delicate electronic components that are susceptible to
damage from static electricity. To avoid such damage, use the following precautions when handling the board:
•
Leave the NC-8100h in its anti-static bag until you are ready to install it.
•
Make sure that you are adequately grounded before touching the NC-8100h. Use an anti-static wrist strap and a
grounding mat if possible. If you do not have an anti-static wrist strap, touch the bare metal surface on the back
of the machine before handling the NC-8100h.
•
Avoid moving around the work area in order to eliminate static charge build-up.
•
If possible, do not work on a carpeted area.
•
Do not flex the board and do not touch the components on the card.
Tools Required:
Phillips Screwdriver
NC-8100h
Quick Network Setup Guide
Print/Fax Server
1
One Touch Key Sheet
(For use with MFC9660, MFC9880,
MFC9800 Only)