- ページ 9

ソフトウェア Brother 2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother 2 39 ページ。 Hewlett-packard laser printer user guide
Brother 2 にも：ユーザーマニュアル (15 ページ)

Sending Data to the Machine

Data opened in CanvasWorkspace can be transferred to a

cutting machine as an FCM file (which can be retrieved on the

cutting machine).

Note

• In order to transfer data for a roll feeder, [Rolled Material]

must have been selected under [Artboard Size] when the

data was edited. Before transferring the data, recheck this

setting. For details, see "Creating Data" on page 4.

■ Transferring Using a USB Cable (compatible

only with Windows)

Insert the USB cable connectors into the corresponding

USB ports on the computer and on the cutting machine.

a USB port for a computer

b USB cable

Note

• The connectors on the USB cable can only be inserted into

a port in one direction. If it is difficult to insert the cable

connector, do not insert it with force and check the

orientation of the connector.

• When transferring data for a roll feeder to the cutting

machine, the home screen must be displayed on the

machine.

In CanvasWorkspace, select [Export/Transfer FCM File]

from the [File] menu.

Select [Transfer FCM File to ScanNCut DX via USB

Cable].



When a message appears, indicating that the data has been

sent to the machine, confirm the details, and then click [OK].

■ Transferring Via Wireless Network

Connection

●

A connection to the Internet is required.

●

The machine must be connected to the wireless network. This

function can be used only after a connection to

CanvasWorkspace has been established. For details on

establishing a connection, refer to the Operation Manual for the

cutting machine.

In CanvasWorkspace, select [Export/Transfer FCM File]

from the [File] menu.

Select [Transfer FCM File via the Internet].



When a message appears, indicating that the data has been

sent to the machine, confirm the details, and then click [OK].