- ページ 18

冷蔵庫 AEG ARCTISのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG ARCTIS 27 ページ。 Built-in fridge-freezers
AEG ARCTIS にも：取扱説明書 (32 ページ), 取扱説明書 (28 ページ), 取扱説明書 (40 ページ), 取扱説明書 (28 ページ), 操作説明 (16 ページ), 取扱説明書 (36 ページ), 取扱説明書 (36 ページ), 取扱説明書 (26 ページ), 取扱説明書および設置マニュアル (28 ページ), 取扱説明書 (36 ページ), 取扱説明書 (34 ページ), ユーザーマニュアル (24 ページ), 取付説明書 (11 ページ), 取扱説明書 (29 ページ), 取扱説明書 (23 ページ), 取付説明書 (25 ページ), 取付説明書 (24 ページ)

• Do not use defrosting sprays, they can be hazardous to your health

and/or contain substances that damage plastics.

Caution! Do not touch frozen food with wet hands. Your hands could

stick to the food and can cause skin abrasions.

1. Switch on the FROSTMATIC function a few hours before defrosting to

make sure frozen food remains sufficiently frozen.

2. Remove frozen food, wrap it in several layers of newspaper and store

it, covered, in a cool place.

3. Switch off the appliance and unplug it, or pull the fuse or switch off

the circuit breaker.

4. Remove all drawers except the bottom one.

The bottom drawer serves as a practical con-

tainer to collect the water from the thawing

ice. Pull out the drawer and insert the plastic

scraper in the special location to act as an

extension channel to collect the defrost

water.

Tip: To speed up the defrosting process, place

a pan with warm water in the appliance and

close the door. Remove pieces of ice that have fallen before they com-

pletely defrost.

5. After defrosting, thoroughly clean the freezer compartment and interi-

or fittings (see "Cleaning and Care" section).

6. Do not forget to switch the FROSTMATIC function off again.

Cleaning and Care

For hygienic reasons the appliance interior, including interior acces-

sories, should be cleaned regularly.

Warning!

• The appliance must not be connected to the mains during cleaning.

Danger of electrical shock! Before cleaning switch the appliance off

and remove the plug from the mains, or switch off or disconnect

from the electricity supply.

• Never clean the appliance with a steam cleaner. Moisture could

accumulate in electrical components and there is a danger of an

electric shock. Hot vapours can lead to the damage of plastic parts.

• The appliance must be dry before it is placed back into service.