- ページ 38

ソフトウェア Brother FaxのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother Fax 44 ページ。 Brother internet fax user's guide
Brother Fax にも：操作マニュアル (15 ページ)

Brother Internet Print

Using BRAdmin Professional utility to Configure

the Print Server

Using the BRAdmin Professional utility, you can configure

the Brother print server using the TCP/IP protocol.

The steps required to configure the Print/Fax server to receive print

jobs from a Windows

is as follows:

Start BRAdmin Professional utility.

Select the node name of the desired Brother Print/Fax server

from the list and double click on it. (the default node name is

usually BRN_xxxxxx, where xxxxxx is the last six digits of the

Ethernet address (MAC address)). You will be prompted for a

password; the default password is access.

You can find the node name and MAC address by printing

out the machine configuration page. Refer to this user's

guide chapter 3 for information on how to print the

configuration page on your Print/Fax server.

Click on the POP3/SMTP tab.

Enter the address of the POP3 server (consult your network

administrator if you do not know this address).

Enter the mailbox name for the remote Brother Print/Fax server.

Usually this will be the first part of the E-mail address (for

example, if the E-mail address of the print server is

emailprinter@xyz, then the mailbox name would be

emailprinter).

Enter the password for the mailbox, if any.

The Print/Fax server is configured by default to poll the POP3

server every 30 seconds. You may change this value, if desired.

CONFIGURING INTERNET PRINTING FOR WINDOWS

98/Me/2000/XP. PC running the BIP software

3 - 4