- ページ 7

ソフトウェア Brother HL-760PLUS - HL 760 Plus B/W Laser PrinterのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother HL-760PLUS - HL 760 Plus B/W Laser Printer 17 ページ。 Quick setup guide - english
Brother HL-760PLUS - HL 760 Plus B/W Laser Printer にも：操作マニュアル (25 ページ)

ページを印刷する

English: HL-YL Quick Setup Guide, Body

Action 4: Connect Your Printer to Your Computer

You must connect the printer to your computer with a suitable interface cable. A bi-directional

IEEE 1284 compliant parallel cable should be used for this connection, unless you are using

the optional serial interface board.

NOTE

The printer can also operate with an RS-232C/RS-422A serial interface by installing the

optional serial interface board. In some countries it might be pre-installed. For more

information, see "CHAPTER 4 OPTIONS" in the User's Guide.

For the location of your computer's parallel (or serial, if you are using the optional interface

board) printer port, refer to the User's Guide of your computer.

Make sure that the printer power switch is

off before connecting or disconnecting the

interface cable.

Also, make sure that the computer is turned

off.

Connect the parallel interface cable (printer

cable) to the parallel interface port of the

printer. (

)

Secure the connection with the wire clips.

(

)

Connect the interface cable to the printer

port of the computer.