- ページ 15

ソフトウェア Brother Inkjet MFC-J4710DWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother Inkjet MFC-J4710DW 22 ページ。 Quick setup guide - spanish
Brother Inkjet MFC-J4710DW にも：マニュアル (36 ページ), 製品安全マニュアル (17 ページ), マニュアル (13 ページ), マニュアル (13 ページ), クイック・セットアップ・マニュアル (47 ページ), 製品安全マニュアル (20 ページ), 仕様 (2 ページ), クイック・セットアップ・マニュアル (47 ページ), (スペイン語）ウェブ・コネクト・マニュアル (38 ページ), (スペイン語）マニュアル (24 ページ), (製品安全ガイドマニュアル (16 ページ), (スペイン語）マニュアル (12 ページ), (スペイン語）マニュアル (11 ページ), (クイック設定ガイド (47 ページ)

Configuration methods

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed. Press OK on

your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press

Do one of the following:



When your Brother machine is the G/O, it will wait for a connection request from your mobile device.

When PIN Code appears, type the PIN displayed on your mobile device in to the machine. Press

OK. Follow the instructions and go to step i.

If the PIN is displayed on your Brother machine, type the PIN in to your mobile device.



When your Brother machine is not the G/O, it will display available device names with which to

configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press

OK. Search for available devices again by pressing Rescan. Go to step h.

Do one of the following:



Press Display PIN Code to display the PIN on your machine and type the PIN in to your mobile

device. Follow the instructions and then go to step i.



Press Input PIN Code to type a PIN shown by your mobile device in to the machine and then press

OK. Follow the instructions and then go to step i.

If your mobile device does not display a PIN, press

and try again.

If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 14.

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), follow these steps to

configure a Wi-Fi Direct network.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message

Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect.

Press Settings.

Press s or t to choose Network.

Press s or t to choose Wi-Fi Direct.

Press s or t to choose Group Owner and then press On.

Press s or t to choose PIN Code.

on your Brother machine. Go back to step a