- ページ 14

ソフトウェア Brother MFC 240C - Color Inkjet - All-in-OneのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC 240C - Color Inkjet - All-in-One 26 ページ。 Windows vista
Brother MFC 240C - Color Inkjet - All-in-One にも: サービスマニュアル (5 ページ), クイック・セットアップ・マニュアル (27 ページ), セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (26 ページ), サービスマニュアル (17 ページ)

Brother MFC 240C - Color Inkjet - All-in-One クイック・セットアップ・マニュアル
STEP1
Setting Up the Machine
10

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Fax:_
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
under the incorrect character, press Clear/Back.
Press
One
key
time
2
3
4
5
6
7
8
9
6
Press Stop/Exit.
Note
If you want to repeat input, press Stop/Exit to start
from step 1.
For details, see Entering Text in Appendix C
of the User's Guide.
12
to move the
or
to move the cursor
Two
Three
times
times
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
T
U
V
W
X
Y
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.
To program this information into your machine,
see Setting the date and time on page 11 and
Setting your station ID on page 12.
11
Setting tone or pulse dialing
mode
Your machine comes set for a Tone dialing service. If
you have a Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press 0.
3
Four
Press 4.
times
4
Press a or b to choose Pulse (or Tone).
2
Press OK.
3
5
4
Press Stop/Exit.
5
6
S
8
Z