- ページ 9
ソフトウェア Brother MFC 240C - Color Inkjet - All-in-OneのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC 240C - Color Inkjet - All-in-One 27 ページ。 Windows vista
Brother MFC 240C - Color Inkjet - All-in-One にも: クイック・セットアップ・マニュアル (26 ページ), サービスマニュアル (5 ページ), セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (26 ページ), サービスマニュアル (17 ページ)
5
Set Your Country
(For Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly.
1
Check that the power is turned on by
connecting the power cord.
The LCD shows:
Set Country
q
Press OK Key
2
Press OK.
The LCD shows:
Australia
q
Select ab & OK
3
Press a or b to select the country
(Australia or New Zealand).
4
Press OK when the LCD shows your country.
5
The LCD prompts you to make sure of the
country again.
Australia?
q
1.Yes 2.No
6
Press 1 to go to step 7.
---OR---
Press 2 to go back to step 1 to select the
country again.
7
After the LCD shows Accepted for two
seconds, it shows; Please Wait.
1
2
e
3
Setting Up the Machine
6
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
Make sure that the power is turned on.
The LCD shows:
No Cartridge
Open the ink cartridge cover (1).
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
1
1
7