- ページ 15

冷蔵庫 AEG OKO-SANTO 2842-4 iのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG OKO-SANTO 2842-4 i 28 ページ。 Integrating fridge freezer

ページを印刷する

Something Not Working

If the appliance is not functioning correctly, please carry out the fol-

lowing checks before contacting your local AEG Service Force Cen-

tre.

Warning!

Repairs should only be carried out by qualified service engineers.

Repairs carried out by inexperienced persons may cause injury or

serious malfunctioning.

Malfunction

Appliance does not work.

Appliance cools too much.

The food is too warm.

Interior lighting does not

work.

Heavy build up of frost, pos-

sibly also on the door seal.

Possible Cause

Appliance is not switched on Switch on the appliance.

Mains plug is not plugged in

or is loose.

Fuse has blown or is defec-

tive.

Socket is defective.

Temperature is set too cold. Turn the temperature regu-

Temperature is not properly

adjusted.

Door was open for an exten-

ded period.

A large quantity of warm food

was placed in the appliance

within the last 24 hours.

The appliance is near a heat

source.

Light bulb is defective.

Door seal is not air tight

(possibly after changing

over the hinges).

Remedy

Insert mains plug.

Check fuse, replace if

necessary.

Mains malfunctions are to be

corrected by an electrician.

lator to a warmer setting

temporarily..

Please look in the "Initial

Start Up" section.

Open the door only as long

as necessary.

Turn the temperature regu-

lator to a colder setting tem-

porarily.

Please look in the "Installa-

tion location" section.

Please look in the "Chan-

ging the Light Bulb" section.

Carefully warm the leaking

sections of the door seal

with a hair dryer (not hotter

than approx. 50 ¡C). At the

same time shape the war-

med door seal by hand such

that it sits correctly.