- ページ 5

冷蔵庫 AEG OKO-SANTO 3175-4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG OKO-SANTO 3175-4 44 ページ。 Electronic refrigerator/freezer combinations

Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure

that you understand them all before installing or using this

appliance. Your safety is of paramount importance. If you are unsure

about any of the meanings of these warnings contact the Customer

Care Department.

Prior to Installation

• Check the refrigerator/freezer for transport damage. Under no circum-

stances should a damaged appliance be installed! In the event of damage,

please contact your retailer.

Installation

• This appliance is heavy. Care should be taken when moving it.

• It is dangerous to alter the specifications or attempt to modify this pro-

duct in any way.

• Ensure that the appliance does not stand on the electrical supply cable. If

the supply cable is damaged, it must be replaced by a cable available

from your local Service Force Centre.

• Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

• Parts which heat up should not be exposed. Whenever possible, the back

of the appliance should be close to a wall, but leaving the required

distance for ventilation, as stated in the installation instructions.

• The appliance should be left for 2 hours after installation before it is tur-

ned on, in order to allow the refrigerant to settle.

Refrigerant

The refrigerant isobutane (R600a) is contained within the refrigerant

circuit of the appliance, a natural gas with a high level of environmen-

tal compatibility, which is nevertheless flammable.

• During transportation and installation of the appliance, be certain that

none of the components of the refrigerant circuit become damaged.

• If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition;

– thoroughly ventilate the room in which the appliance is situated.

818 14 00-00/6