- ページ 10

冷蔵庫 AEG OKO-SANTO SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG OKO-SANTO Series 25 ページ。 Automatic refrigerator
AEG OKO-SANTO Series にも：取扱説明書 (22 ページ)

Installation

See installation instructions supplied.

Please check whether, after installing your appliance and especially

after rehingeing the door, the door seal seals right round. An untight

door seal may lead to heavy frosting and thereby to a higher power

consumption (see also „What to do if...").

A correctly installed, earthed socket is required for the electrical supply.

The supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electri-

cal installation must include suitable means of isolating the appliance

from the mains (e.g. fuse, cut-out, current trip or similar with a mini-

mum contact separation of 3 mm).

0 Before initial start-up, refer to the appliance serial plate to ascertain if

supply voltage and current values correspond with those of the mains

at the installation location.

e.g.:

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

The mains cable may only be changed by a qualified electrician. If your

appliance needs repairing, please contact our Customer Service.

AC 220 ... 240 V 50 Hz or

220 ... 240 V ~50 Hz