プリンター Fujitsu fi-4530CのPDF インストール手順をオンラインで閲覧またはダウンロードできます。Fujitsu fi-4530C 5 ページ。 Image scanner
Fujitsu fi-4530C にも：はじめに (27 ページ), インストール手順マニュアル (7 ページ), インストール手順マニュアル (9 ページ), パンフレット＆スペック (2 ページ), インストール手順 (3 ページ), 消耗品の交換とクリーニング (14 ページ), クリーニング取扱説明書 (13 ページ), 洗浄方法 (2 ページ), 取扱説明書 (10 ページ)

M3093GX\DG\M3096G\GX\M3097G+\DG

Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI

Step A: Required hardware.

To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum)

Narrow SCSI cable.

Step B: Removing the shipping bracket.

It is recommended that before you connect the scanner to your computer that you inspect the

scanner and remove the shipping bracket first.

Removing the shipping bracket: The flatbed scanner models typically come with a

factory installed shipping lock designed to protect the scanner during shipment. Before

the scanner can be used the shipping lock must be unlocked. Follow these instructions

to unlock the shipping bracket:

1. Slide the scanner to its side as shown in figure below.

2. Unscrew the retainer screw and remove the shipping bracket.

3. Place the shipping bracket in the "use position" slot and secure it with the retainer

screw (see figure below)

Place scanner back in its normal position

Win95\98\ME Installation Procedure

Rev052104A