- ページ 12

冷蔵庫 AEG OKO_SANTO SUPERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG OKO_SANTO SUPER 22 ページ。 Automatic refrigerator
AEG OKO_SANTO SUPER にも：取扱説明書 (21 ページ), 取扱説明書 (32 ページ), 取扱説明書 (32 ページ)

ページを印刷する

Starting up and temperature regulation

Insert the plug of the connection lead into the plug socket with pro-

tective earth contact. When the refrigerator compartment door is

opened, the internal lighting is switched on.

The temperature selector knob is loca-

ted on the RH side of the refrigerator

compartment.

Setting „0" means: Off.

Turning clockwise in direction „1":

Refrigerating unit on, the latter

then operating automatically.

AEG62

Setting „1" means:

Hightest temperature, warmest setting.

Setting „6" (end-stop) means:

Lowest temperature, coldest setting.

At a low ambient temperature of around 16°C, setting „1" should be

selected. At ambient temperatures of around 25°C, select setting „2".

If you require a lower temperature, select setting „3" or „4".

Important!

High ambient temperatures (e.g. on hot summer days) and a cold set-

ting on the temperature regulator (position"5" to "6") can cause the

compressor to run continuously.

Reason: when the ambient temperature is high, the compressor must

run continuously to maintain the low temperature in the appliance.

The fridge will not be able to defrost since automatic defrosting of

the fridge is only possible when the compressor is not running (see

also "Defrosting" section). The result is the build up of a thick layer of

frost on the fridge rear wall.

If this happens, turn the temperature regulator back to a warmer set-

ting (position "3" to "4"). At this setting the compressor will be swit-

ched on and off as usual and automatic defrosting recommenced.