- ページ 14

ソフトウェア Brother MFC-8460NのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8460N 23 ページ。 Scan to ftp (file transfer protocol)
Brother MFC-8460N にも：ユーザーマニュアル (8 ページ), クイック・セットアップ・マニュアル (41 ページ), マニュアル (7 ページ), クイック・セットアップ・マニュアル (37 ページ)

ページを印刷する

STEP 2

Installing the Driver & Software

When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software License

Agreement.

Choose Network Connection, and then click

Next.

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

Next.

This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically.

If your machine shows APIPA in the IP Address

field, click Configure IP Address and enter an IP

address for your machine that is suitable for your

network.

• If the machine is not yet configured for use on your

network, the following screen appears.

Click OK.

The Configure IP Address window will appear.

Enter an IP address for your machine that is

suitable for your network by following the

on-screen instructions.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another. Please wait, it will

take a few seconds for all the screens to

appear.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Note

When this screen appears, click the check box and

click Install to complete the installation properly.

When the Brother and ScanSoft On-Line

Registration screen is displayed, make your

selection and follow the on-screen instructions.

Click Finish to restart your computer.

After restarting the computer, you must be

logged on with Administrator rights.

Note

After restarting the computer, the Installation

Diagnostics will run automatically. If the

installation is unsuccessful, the installation results

window will be shown. If the Diagnostics shows a

failure, please follow the on-screen instructions or

read the on-line help and FAQs in

Start/All Programs/Brother/MFC-XXXX (where

xxxx is your model number).

Windows