- ページ 25

ソフトウェア Brother MFC-8460NのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8460N 37 ページ。 Scan to ftp (file transfer protocol)
Brother MFC-8460N にも：ユーザーマニュアル (8 ページ), クイック・セットアップ・マニュアル (41 ページ), セットアップマニュアル (23 ページ), マニュアル (7 ページ)

ページを印刷する

• Once you are sure that you can print after the

installation, restart your Firewall software.

• Firewall settings on your PC may reject the

necessary network connection for Network

Scanning and PC-Fax.

Follow the instructions below to configure

your Windows Firewall. If you are using a

personal Firewall software, see the User's

Guide for your software or contact the

software manufacturer.

• Windows

XP SP2 users:

1 Click the Start button, Control Panel

and then Windows Firewall.

Make sure that Windows Firewall on the

General tab is set to On.

2 Click the Advanced lab and

Settings...button.

3 Click the Add button.

4 To add port 54925 for network scanning,

enter the information below:

1) In Description of service: - Enter

any description, for example

"Brother Scanner" (without the

inverted commas).

2) In Name or IP address (for

example 192.168.0.12) of the

computer hosting this service on

your network: - Enter "Localhost"

(without the inverted commas).

3) In External Port Number for this

service: - Enter "54925" (without the

inverted commas).

4) In Internal Port number for this

service: - Enter "54925" (without the

inverted commas).

5) Make sure UDP is selected.

6) Click OK.

5 Click the Add button.

6 To add port 54926 for Network PC-Fax,

enter the information below:

1) In Description of service: - Enter

any description, for example "Brother

PC-Fax" (without the inverted

commas).

2) In Name or IP address (for

example 192.168.0.12) of the

computer hosting this service on

your network: - Enter "Localhost"

(without the inverted commas).

3) In External Port Number for this

service: - Enter "54926" (without the

inverted commas).

4) In Internal Port number for this

service: - Enter "54926" (without the

inverted commas).

5) Make sure UDP is selected.

6) Click OK.

7 If you still have trouble with your network

connection, click the Add button.

8 To add port 137 for both network

scanning and Network PC-Fax receiving,

enter the information below:

1) In Description of service: - Enter

any description, for example "Brother

PC-Fax Receiving" (without the

inverted commas).

2) In Name or IP address (for

example 192.168.0.12) of the

computer hosting this service on

your network: - Enter "Localhost"

(without the inverted commas).

3) In External Port Number for this

service: - Enter "137" (without the

inverted commas).

4) In Internal Port number for this

service: - Enter "137" (without the

inverted commas).

5) Make sure UDP is selected.

6) Click OK.

9 Make sure if the new settings are added

and are checked, and then click OK.

■ For Network installations, the Repair

MFL-Pro Suite selection from the main

menu is not supported.

■ Network Scanning, Network Remote Setup,

Network PC-FAX Receiving are not

supported in Windows NT

■ For configuration of advanced network

functions such as LDAP, Scan to FTP and

Fax to Server, see the Software and

Network User's Guides located on the

CD-ROM.

4.0.