- ページ 3

ソフトウェア Brother MFC-8460NのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8460N 37 ページ。 Scan to ftp (file transfer protocol)
Brother MFC-8460N にも：ユーザーマニュアル (8 ページ), クイック・セットアップ・マニュアル (41 ページ), セットアップマニュアル (23 ページ), マニュアル (7 ページ)

■ Getting Started

Carton Components

. Automatic Document Feeder (ADF)

. Control Panel

. Face-down Output Tray

Support Flap (Support Flap)

. Front cover

Drum Unit Assembly

(including Toner Cartridge)

Carton components may differ from one country to another.

Save all packing materials and the carton.

■ To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is

properly grounded through the standard electrical wiring. None grounded equipment may cause an

electrical shock hazard, and may cause excessive electrical noise radiation.

■ The interface cable is not a standard accessory. Please purchase the appropriate interface cable for

the interface you intend to use (Parallel, USB or Network).

■ Do NOT connect the interface cable at this time. Connecting the interface cable is done during the

software installation process.

■ USB interface cable

Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 metres.

When you use a USB cable, make sure you connect it to the USB port of your computer and not to a

USB port on a keyboard or non-powered USB hub.

■ Parallel interface cable

Please make sure you use a Parallel interface cable that is no longer than 2.0 metres.

Use a shielded interface cable that is IEEE 1284-compliant.

■ Network cable

Use a straight-throgh Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast

Ethernet Network.

. Paper Tray

. Power Switch

. Document Cover

. ADF Document Output Support Flap

AC Power Cord

Quick Setup Guide

CD-ROM

User's Guide

Telephone Line Cord