- ページ 11

プリンター Fujitsu FI-6230のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu FI-6230 20 ページ。 Color duplex workgroup scanners
Fujitsu FI-6230 にも: パンフレット&スペック (2 ページ), 取扱説明書 (10 ページ), はじめに (23 ページ), クリーニングとメンテナンス (47 ページ)

Fujitsu FI-6230 スタートマニュアル
ATTENTION
To make sure that FUJITSU TWAIN 32 is successfully
installed, perform a scan with a TWAIN-compliant
application such as ScandAll PRO. For information about
how to scan with ScandAll PRO, refer to section "2.4
Checking Scanner Driver Operation" on page 9.
For FUJITSU ISIS Scanner Driver
FUJITSU ISIS is an ISIS-compliant scanner driver.
To use this scanner with any ISIS-compatible
application, install FUJITSU ISIS, following the procedure
below.
■ Preparation
Do the following before installing the driver:
Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
Connect the scanner correctly to your computer.
HINT
For details on how to connect the scanner, refer to section
"2.2 Connecting the Scanner to Your PC" on page 4.
■ Installing the FUJITSU ISIS
Scanner Driver
HINT
Screenshots taken in Windows XP are used as examples.
The displayed windows and operations may slightly vary
depending on the operating system you are using.
1.
Press the Power button to turn on the scanner.
2.
Turn on your computer, and then log on to
Windows.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
3.
When the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hardware
Wizard] dialog box appears. Click the [Cancel]
button to close the Wizard dialog box.
4.
This screen may not appear if the "AutoPlay" setting is set to
off. In this case, find "Install.exe" in the CD-ROM using
"Explore" or "My Computer" and execute it.
5.
6.
After you select [Yes] for installing Error Recovery Guide,
the [Choose Setup Language] dialog box appears. Select a
language and follow the on-screen instructions. The Error
Recovery Guide dialog box is automatically displayed
when the installation is complete. Wait until the installation
of the ISIS driver starts.
7.
8.
fi-6130/fi-6230 Image Scanner Getting Started
Insert the "Setup CD-ROM" into the CD drive.
<SETUP DISK START UP SCREEN> appears.
ATTENTION
Click [INSTALL PRODUCTS], and then click [ISIS
Driver].
Error Recovery Guide Installation dialog box
appears.
Error Recovery Guide is an application with which you
can view on-screen information for troubleshooting
errors that may occur in the scanner. This guide helps
solve problems, so select [Yes] to install it. You may
also choose to install it later.
ATTENTION
Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
Install the driver, following the on-screen
instructions.
6