- ページ 13

ソフトウェア Brother MFC-8710DWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8710DW 30 ページ。 Quick setup guide - english
Brother MFC-8710DW にも：マニュアル (36 ページ), クイック・セットアップ・マニュアル (45 ページ), ユーザーマニュアル (23 ページ), クイック・セットアップ・マニュアル (45 ページ), 製品安全マニュアル (23 ページ)

Configuration methods

Configuring your network using Wi-Fi Direct for MFC-8710DW

and MFC-8910DW

The Wi-Fi Direct network settings are configured from the control panel of the machine.

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these

instructions.

Press Menu.

Press a or b to choose Network.

Press OK.

Press a or b to choose Wi-Fi Direct.

Press OK.

Press a or b to choose Push Button.

Press OK.

When Wi-Fi Direct On? is displayed, press a or b to choose On and then press OK.

To cancel, press a or b to choose Off and then press OK.

When Other Network I/F will be disabled. Do you want to continue? is displayed,

press 1 to accept.

To cancel, press 2.

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

Activate Wi-Fi Direct on other device. is displayed.

Press OK on your machine. This will start the Wi-Fi Direct setup.

To cancel, press Clear.

Do one of the following:



When your Brother machine is the G/O (Group Owner), your mobile device will try to connect to the

machine directly.



When your Brother machine is not the G/O (Group Owner), the machine will display available device

names to configure a Wi-Fi Direct network with. Choose the mobile device you want to connect to and

press OK. You can re-search for available devices by pressing Rescan.

If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device

or scanning to your mobile device, you can download the

Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center

(http://solutions.brother.com/).

If the connection failed, see Troubleshooting uu page 21.