- ページ 7
ソフトウェア Brother MFC-8710DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8710DW 45 ページ。 Quick setup guide - english
Brother MFC-8710DW にも： マニュアル (30 ページ), マニュアル (36 ページ), ユーザーマニュアル (23 ページ), クイック・セットアップ・マニュアル (45 ページ), 製品安全マニュアル (23 ページ)
ページを印刷する
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the protective cap c
from the EXT. jack on the machine.
a Extension telephone answering machine
(not supported)
b External telephone answering machine
c Protective cap
Set the receive mode to External TAD if
you have an external answering machine.
See Choose the correct Receive
Mode on page 9. For additional details, see
Connecting an external TAD (telephone
answering device) in the Basic User's Guide.
5
Wireless setup
(if needed)
a
When the Wi-Fi setup message appears, press
OK.
Do one of the following:
If you are using a Macintosh computer or a
mobile device on a wireless network, go to
b.
If you are using a Windows
want to connect your Macintosh using USB
or wired network, go to c.
Setup Wi-Fi?
Yes
a
No
b
Select ab or OK
b
Press a or b to choose Yes.
Press OK.
Then go to step 19 on page 25 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 6 to finish the machine setup.
Note
If you want to change the initial settings on your
machine first, you can choose No and you will be
able to configure the wireless settings later.
c
Press a or b to choose No.
Press OK.
Then go to step 6.
The wireless setup for Windows
covered in later steps.
®
computer or
®
users will be
7