- ページ 16
プリンター Fujitsu fi-748PRBのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fujitsu fi-748PRB 20 ページ。 Imprinter
Fujitsu fi-748PRB にも: サービスマニュアル (18 ページ)
4.3. Cleaning the Rollers
When ink or paper dust is stuck on the imprinter feed roller
surfaces, documents may not feed smoothly.
To prevent feed problems, clean the roller surfaces
regularly.
HINT
The recommended cleaning cycle is every 5,000 sheets. The
actual cleaning cycle may be shorter depending on how often the
imprinter is used and the documents.
1.
Open the print section.
2.
Clean the rubber rollers.
Clean the rubber rollers (eight in total) under the
feeding section.
Print Section
Gently wipe the dirt and dust off the surface of the
rollers with a cloth moistened with Cleaner F1.
ATTENTION
It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity. Wipe off the
cleaner completely to leave no residue on the cleaned parts.
Clean the entire surface of the rubber rollers as you
rotate them manually.
ATTENTION
When cleaning, be careful not to touch the metal wheels
located at the print section.
14
|
3.
Clean the plastic rollers.
Clean the two plastic rollers (black) at the print
section.
Print Section
Rotate the rollers manually while gently wiping the
dirt and dust off the surface of the rollers with a cloth
moistened with Cleaner F1.
4.
Confirm that the dirt is removed and then close
the print section.
4.4. Cleaning Materials
Name
Cleaner F1
Cleaning Wipe
*1
For information about the cleaning materials, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
*2
Pre-moistened with Cleaner F1. It can be used instead of moistening
a cloth with Cleaner F1.
ATTENTION
●
In order to use the cleaning materials safely and correctly,
read the precautions on each product thoroughly.
●
It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity. Wipe off the
cleaner completely to leave no residue on the cleaned parts.
Part No.
Notes
Volume:
PA03950-0352
100 ml
24 packets
PA03950-0419
(*1) (*2)