- ページ 6
ソフトウェア Brother MFC-8950DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8950DW 43 ページ。 Laser printers
Brother MFC-8950DW にも: マニュアル (36 ページ), ネットワーク・マニュアル (29 ページ), マニュアル (27 ページ), クイック・セットアップ・マニュアル (44 ページ), マニュアル (21 ページ), ユーザーマニュアル (23 ページ), 製品安全マニュアル (23 ページ)
![Brother MFC-8950DW クイック・セットアップ・マニュアル](/uploads/products/server2/2457030/2457030.png)
d
Put the paper in the tray and make sure:
The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
The side to be printed on is face down.
The paper guides touch the sides of the
paper so it will feed correctly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Lift up the support flap a to prevent paper from
sliding off the face-down output tray.
For more information about recommended
paper, see Recommended paper and print
media in the Basic User's Guide.
6
4
Connect the power cord
and telephone line
Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then plug it into an electrical socket.
b
Turn the machine's power switch on.
Important
DO NOT touch the Touchscreen immediately
after plugging in the power cord or turning the
machine on. Doing this may cause an error.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
Important
The telephone line cord MUST be connected to
the socket on the machine marked LINE.
(Example for U.K.)