- ページ 10

ソフトウェア Brother MFC-J4310DWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J4310DW 22 ページ。 Air print guide - spanish
Brother MFC-J4310DW にも: クイック・セットアップ・マニュアル (47 ページ), マニュアル (36 ページ), 製品安全マニュアル (17 ページ), マニュアル (13 ページ), マニュアル (13 ページ), 製品安全マニュアル (20 ページ), (スペイン語)ウェブ・コネクト・マニュアル (38 ページ), (スペイン語)マニュアル (24 ページ), (製品安全ガイドマニュアル (16 ページ), (スペイン語)マニュアル (12 ページ), (スペイン語)マニュアル (11 ページ)

Brother MFC-J4310DW マニュアル
Configuration methods
d
Press Wi-Fi Direct.
e
Press PIN Code.
f
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
g
Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed. Press OK on
your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press
h
Do one of the following:
When your Brother machine is the G/O, it will wait for a connection request from your mobile device.
When PIN Code appears, type the PIN displayed on your mobile device in to the machine. Press
OK. Follow the instructions and go to step j.
If the PIN is displayed on your Brother machine, type the PIN to your mobile device.
When your Brother machine is not the G/O, it will display available device names with which to
configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press
OK. Search for available devices again by pressing Rescan. Go to step i.
i
Do one of the following:
Press Display PIN Code to display the PIN on your machine and type the PIN in to your mobile
device. Follow the instructions and then go to step j.
Press Input PIN Code to type a PIN shown by your mobile device in to the machine and then press
OK. Follow the instructions and then go to step j.
If your mobile device does not display a PIN, press
and try again.
j
If your mobile device connects successfully, the machine displays the message Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 14.

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), follow these steps to
configure a Wi-Fi Direct network.
NOTE
When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.
a
Press
.
b
Press All Settings.
.
on your Brother machine. Go back to step a
2
2
7