- ページ 24

冷蔵庫 AEG RCB732E4MGのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG RCB732E4MG 31 ページ。
AEG RCB732E4MG にも：ユーザーマニュアル (48 ページ)

defrosting

Your refrigerator performs automatic defrosting. The water formed as a

result of defrosting passes through the water collection spout, flows into

the vaporisation container behind your refrigerator and evaporates there.

• Make sure you have disconnected the plug of your refrigerator

before cleaning the vaporisation container.

• Remove the vaporisation container from its position by removing

the screws as indicated. Clean it with soapy water at specific time

intervals. This will prevent odours from forming.

Replacing LEd Lighting

To replace any of the LEDs, please contact the nearest Authorised Service Centre.

Note: The numbers and location of the LED strips may change according to the model.

TRANSPORTATION ANd CHANGING OF

PART - 5.

INSTALLATION POSITION

Transportation and Changing Positioning

• The original packaging and foam may be kept for re-transportation (optional).

• Fasten your appliance with thick packaging, bands or strong cords and follow the

instructions for transportation on the packaging.

• Remove all movable parts (shelves, accessories, vegetable bins, and so on) or fix them

into the appliance against shocks using bands when re-positioning or transporting.

Always carry your appliance in the upright

position.

• It is not possible to change the opening direction of your appliance door if door handles

are installed on the front surface of the appliance door.

• It is possible to change the opening direction of the door on models without handles.

• If the door-opening direction of your appliance can be changed, contact the nearest

Authorised Service Centre to change the opening direction.

EN -24-

Evaporating

tray