- ページ 9

ソフトウェア Brother MFC-J825DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J825DW 42 ページ。 Quick setup guide - spanish
Brother MFC-J825DW にも： マニュアル (12 ページ), マニュアル (21 ページ), 製品安全マニュアル (17 ページ), ウェブ・コネクト・マニュアル (22 ページ), クイック・セットアップ・マニュアル (45 ページ), 安全マニュアル (17 ページ), トラブルシューティングマニュアル (6 ページ), (スペイン語）マニュアル (21 ページ), (スペイン語）マニュアル (16 ページ), (クイック設定ガイド (44 ページ)

ページを印刷する
Brother MFC-J825DW クイック・セットアップ・マニュアル
9
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful.
Instructions on using this feature uuBasic User's
Guide: Transmission Verification Report
10
Set Tone or Pulse dialling
mode
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Menu.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Tone/Pulse.
e
Press Tone/Pulse.
f
Press Pulse (or Tone).
g
Press Stop/Exit.
11
Set the telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly by completing the following steps.
a
Press Menu.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Phone Line Set.
e
Press Phone Line Set.
f
Press Normal, PBX or ISDN.
g
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Branch Exchange (PBX). Your machine can be
connected to most types of PBX. The machine's
recall feature supports timed break recall only (TBR).
TBR will work with most PBX systems allowing you to
gain access to an outside line, or transfer calls to
another extension. The feature works when the Tel/R
key is pressed.
9