- ページ 43

ソフトウェア Brother MFC-J835DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J835DW 45 ページ。 Quick setup guide - spanish
Brother MFC-J835DW にも：マニュアル (12 ページ), マニュアル (21 ページ), 製品安全マニュアル (17 ページ), ウェブ・コネクト・マニュアル (22 ページ), 安全マニュアル (17 ページ), トラブルシューティングマニュアル (6 ページ), (スペイン語）マニュアル (21 ページ), (スペイン語）マニュアル (16 ページ), (クイック設定ガイド (44 ページ)

For Network Users

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.

Make sure the machine is not operating, then disconnect all the cables from the machine (except the power

cord).

Press Menu.

Press Network.

Press a or b to display Network Reset and press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect cables once this is complete.

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,

you can access the character you want.

Press

to cycle between letters, numbers and special characters. (The characters available may differ

depending on your country.)

Inserting spaces

To enter a space, press

Making corrections

If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect

character, press

. Re-enter the correct character. You can also back up and insert a character.

Repeating characters

If you need to enter a character that is on the same button as the character before, press c to move the cursor to

the right before you press the button again.

then press the space button