- ページ 13

プリンター Fujitsu ScanPartner 15CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanPartner 15C 23 ページ。 Image scanner
Fujitsu ScanPartner 15C にも：仕様 (2 ページ), アップグレードマニュアル (6 ページ), ユーザーマニュアル (26 ページ), 消耗品の交換とクリーニング (7 ページ), インストール手順 (5 ページ)

2.7 Connecting the Cable

i). Turning the Power Off

Depress the side marked "O" to turn the power off.

Connect the power cable and SCSI signal cable as shown in Figure 2-8.

ii). Turning the Power On

Depress the side marked "I" to turn the power on. The POWER LED will light. If

not, please check the power source.

iii). SCSI Termination

The Fujitsu Scanpartner 15C comes complete with a built in SCSI terminator. If

the Scanner is the last device in a SCSI chain the terminator should be switched

on. If the Scanner is not the last device the terminator should be off. The

terminator on/off switch is located on the back of the Scanner, to the left of the

SCSI cable connectors.

Host PC

Term.

Host PC

Term.

Scanner

(Terminator Off)

Scanner

(Terminator On)

2-9

SCSI Device

Term.