- ページ 10

ソフトウェア Brother Quattro 2 6700DのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother Quattro 2 6700D 16 ページ。 Kit para crear efectos decorativos con bobinas
Brother Quattro 2 6700D にも：操作マニュアル (50 ページ), 取扱説明書 (40 ページ), (取扱説明書 (16 ページ)

ページを印刷する

Align the upper thread and bobbin thread,

and then pass them under the presser foot

toward the rear of the machine.

Turn on the machine.

Select a stitch.

Memo

• For best results, select a longer stitch length and a

wider stitch width. Depending on the selected stitch,

it may not be possible to change the stitch length

and stitch width settings. For details on adjusting the

stitch length and stitch width, refer to the machine's

Operation Manual.

• Depending on the fabric, bunched stitches may

result. We recommend selecting a simple stitch and

sewing trial stitches to check the sewing results.

Examples of simple stitches:

Adjust the upper thread tension.

For details on adjusting the upper thread tension,

refer to the machine's Operation Manual.

Memo

We recommend an upper thread tension that is higher

than the standard setting.

If your machine is equipped with the

automatic thread cutting function and

automatic reinforcement/reverse stitching

function, make sure the automatic thread

cutting and automatic reinforcement/reverse

stitching have been turned off.

CAUTION

• Before sewing, make sure the automatic thread

cutting has been turned off. If sewing is started with

automatic thread cutting turned on, the thread may

become tangled or the machine may be damaged.

While gently holding threads at the rear of the

machine, turn the handwheel to feed the

needle into the punched hole again, and then

lower the presser foot lever.

Select a low speed, gently hold the threads

behind the presser foot and start sewing.

Threads can be released after several stitches

have been made.

Note

• Before sewing, check that there is enough thread in

the bobbin.

When you have reached the end of the

stitching area, stop the machine.

Note

• Do not sew reinforcement/reverse stitches at the

end of the stitching, otherwise the threads may

become tangled or the needle may break. In

addition, it will be difficult to pull the bobbin thread

up to the wrong side of the fabric.

Raise the needle and presser foot.