- ページ 35
ソフトウェア Brother Quattro 6000DのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother Quattro 6000D 50 ページ。 Kit de actualización iii
Brother Quattro 6000D にも: マニュアル (42 ページ), 操作マニュアル (6 ページ), ユーザーマニュアル (48 ページ), 操作マニュアル (29 ページ), 操作マニュアル (21 ページ), (取扱説明書 (49 ページ), (取扱説明書 (21 ページ), (取扱説明書 (48 ページ)
4
Converting to Embroidery Data
Now, the created image data can be converted to embroidery data.
To change the pattern, press
display it in the pattern drawing screen.
*
However, lines of the drawing other than those drawn freehand to close openings cannot be added, edited
or their color changed. To change a line, continue pressing
before the first color of an area was selected.
1
Press
.
The following message appears.
2
If the image data is correctly converted to embroidery
data, the embroidery data check screen shown at the
left appears. The pattern moves to the center of the
embroidery pattern display area and the embroidery data
is displayed.
In this screen, the number of thread colors and the
number of stitches in the created pattern can be
checked. For details on the various displays, refer to
"Embroidery Data Check Screen" on page 12.
to change the embroidery data back to image data and
If the message shown at
the left appears, either the
drawing contains too many
lines or the design is too
complicated to be converted
to embroidery data.
Press
to return to the
pattern drawing screen, and
then correct the data.
until the drawing returns to the condition
35