- ページ 26

ソフトウェア Brother Quattro 6000DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother Quattro 6000D 48 ページ。 Kit de actualización iii
Brother Quattro 6000D にも：マニュアル (42 ページ), 操作マニュアル (50 ページ), 操作マニュアル (6 ページ), 操作マニュアル (29 ページ), 操作マニュアル (21 ページ), (取扱説明書 (49 ページ), (取扱説明書 (21 ページ), (取扱説明書 (48 ページ)

After the following message appears, select

the area containing one of the two affixed

stickers, and then press

→ The camera detects the two stickers.

Note

• If an error message appears, refer to page 19 to

solve the problem.

When the following message appears, remove

the two stickers, and then re-affix them so

that the fabric can be rehooped with the next

pattern within the embroidering area. This

time, keep the distance between stickers 5 cm

(2 inches) or more. After the stickers have

been affixed, press

Note

• If the stickers are re-affixed within or near the area

where the next pattern is to be embroidered, the

stickers and the next patterns will fit within the

embroidering area more easily after being

rehooped.

• When the following message appears, reaffix the

stickers within the embroidering area.

The message above may also appear when the

sticker is attached slightly out of the embroidering

area. In that case, reaffix the stickers so that they fit

more within the embroidering area.

If the stickers has been successfully detected,

the following message appears. Press

Hoop the fabric so that the next pattern and

the centers for the large circles of the two

marks are within the embroidering area, and

then attach the embroidery frame to the

machine.

Pattern to be embroidered next

Centers of large circles for stickers

Embroidery sheet