- ページ 11

ソフトウェア Brother Remote Printer ConsoleのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother Remote Printer Console 15 ページ。 Hewlett-packard laser printer user guide

3

Remote Printer Console Menu Table

Remote Printer Console menu table
Main menu
Sub menu
Paper
Source
Tray Priority
Manual Feed
Duplex
Duplex Type
Quality
Resolution
HRC
Toner Save
Density
Setup
Power Save Time
Auto Continue
Reprint
Page Protection
Emulation
Auto Emulation
Keep PCL
Error Print
Options
Auto, MP Tray, Tray 1, Tray 2 Selects which paper tray the paper will be
MP>T1>T2, T1>T2>MP
off, on
off, on
Long Binding, Short Binding
HQ1200, 600 dpi, 300 dpi
off, Light, Medium, Dark
off, on
-6, -5, -4, -3, -2, -1, 0, 1, 2, 3,
4, 5, 6
1 to 99 min.
off, on
on, off
Auto, off, A4, Letter, Legal
Auto, PCL, EPSON, IBM,
BR-SCRIPT
EPSON, IBM
off, on
off, on
Descriptions
fed from.
Selects the priority of paper tray the paper
will be fed from.
Selects whether you want to feed paper
manually.
Selects whether you want to automatically
print on both sides of the paper.
Selects the type of duplex binding direction.
You can select a print resolution of 300 dpi,
600 dpi or HQ1200.
High Resolution Control (HRC) offers
improved print quality of letters, numbers
and graphics that conventional laser
printers cannot achieve, with a resolution of
300 or 600 dpi.
Selects whether you want to print lighter to
save toner.
Increases or decreases the print density.
Sets time for the printer to enter sleep mode
after the last control panel operation. If you
Power Save
want to set
to off, go to the
Sleep Mode
submenu of the custom
menu.
Selects whether you want the printer to
recover from a recoverable error.
Selects whether you want to use Reprint
functions.
The printer driver setting overrides the
Remote Printer Console setting. If you want
to change the Reprint setting regardless of
the printer driver setting, go to the Reprint
Mask sub menu of the Custom menu.
If you use Page Protection function, select
either Auto, A4, Letter or Legal.
Selects the emulation mode you want to
use.
Selects the emulation mode when you
select Auto in Emulation sub menu
Selects whether you want to save the
current PCL settings
Selects whether you want to print out the
error message when an error occurs.
3
3 - 1