- ページ 36

タブレット Fujitsu LIFEBOOK NotebookのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu LIFEBOOK Notebook 39 ページ。 Lifebook notebook
Fujitsu LIFEBOOK Notebook にも：ユーザーマニュアル (44 ページ), 一般クリーニング (3 ページ)

ページを印刷する

Problem

Shutdown and Startup Problems

The Suspend/

Resume button

does not work.

The system

powers up, and

displays power on

information, but

fails to load the

operating system.

An error message

is displayed on the

screen during the

notebook (boot)

sequence.

Possible Cause

The Suspend/Resume

button is disabled from

the Advanced submenu

of the Power menu of the

setup utility.

You did not hold the

button in long enough.

There may be a conflict

with the application

software.

The boot sequence

settings of the setup

utility are not compatible

with your confi guration.

You have a secured

system requiring a

password to load your

operating system.

Internal hard drive was

not detected.

Power On Self Test

(POST) has detected a

problem.

Troubleshooting

Possible Solution

Enable the button from the setup utility.

Hold the button longer. This may need to be a

few seconds if your application is preventing

the CPU from checking for button pushes.

Close all applications and try the button again.

Set the operating source by pressing the

[ESC] key while the Fujitsu logo is on screen

or use the [F2] key and enter the setup utility

and adjust the source settings from the Boot

menu.

Make sure you have the right password. Enter

the setup utility and verify the Security settings

and modify them as accordingly.

Use the BIOS setup utility or Primary Master

submenu, located within the Main menu, to try

to auto detect the internal hard drive.

See the Power On Self Test (POST)

messages to determine the meaning and

severity of the problem.

Not all messages are errors; some are simply

status indicators.